Xexun TK102-2

دسته بندی : Personal trackers

تولید کننده : Xexun

توضیح محصول

In order to configure the object, you have to follow these steps by sending SMS commands to the tracker: "begin123456" - resets all controller's settings, password 123456 is set by default make a call to the controller, which should wait until two beeps, break the call and send SMS with it's coordinates "apn123456 mts" - sets the required apn for gprs configuration "apnuser123456 mts" - sets the user for gprs configuration "apnpasswd123456 mts" - sets the password for gprs configuration. For new equipment versions user and password are set with one command "admin123456 mts mts" "GPRS123456" - we're setting GPRS mode "adminip123456 <IP> 20157" - sets the server's address for packages sending, <IP> replace for IP of monitoring system "t030s***n123456" - sets the interval of messages sending to 30 seconds.

adc
ADC sensors
gprs_req
Remote management via GPRS
inputs
Digital sensors
sms_in
SMS sending of data
sms_req
Remote management via SMS
sos
Alarm button
tcp
Communication via TCP

ac_alarm
Acceleration alarm
acc_alarm
Acceleration alarm
battery (%)
Battery charge level
door_alarm
Door alarm
door
Door alarm
event
Event that initiated the message
fortify
Fortification alarm
fuel_level (%)
Fuel level
help_me
SOS button pressed
ign
Ignition on/off
ignition
Ignition on/off
low_battery
Low battery alarm
move_alarm
Movement alarm
over_speed
Over speed alarm
param_1
Additional param 1 value
param_2
Additional param 2 value
power_fail
External power failure
pwr_int (Volt)
Internal battery voltage
rfid
RFID
shake
Shake alarm
temp (°C)
Temperature
trigger
Trigger alarm