ToTarget GPS-ELOCK

gprs_req

Remote management via GPRS

sms_req

Remote management via SMS

tcp

Communication via TCP

drvr_num

Driver number

loc_st

Location status:

• 0 - Invalid location
• 2 - 2D location
• 3 - 3D location

ant_st

GPS antenna status:

• 0 - Antenna is good
• 1 - Antenna is broken
• 2 - Antenna short
• 3 - Mismatch antenna

mileage (km)

Cumulative mileage

veh_st

Vehicle status:

• bit4 - Loaded
• bit9 - No GPRS network
• bit13 - Weak network signal
• bit16 - Only by SMS
• bit17 - Need encryption by PIN code
• bit18 - GPS shutdown status
• bit20 - Lock rod opened
alarm_st
Alarm status:

• bit0 - Rob alarm
• bit1 - Steal alarm
• bit2 - Lock rod opened alarm
• bit3 - Low Battery alarm
• bit4 - Shell opened alarm
• bit5 - Lock rod broken alarm
• bit7 - Lock motor close
• bit9
lac
Location Area Code
cell_id
Cell ID
mcc
Mobile country code
mnc
Mobile network code
rx_lvl
Signal strength
func_code
Function code:

• 1 - Call response
• 2 - GPS data with base station information
• 3 - GPS data at regular time
• 6 - Single data compensation upload in GPRS blind area
• 7 - Multi base station data
• 9 - GPS data wit
lock_st
E-Lock status
rec_f_code
Received function code
inst_code
Instruction code
op_instr
Operation instruction.
85 - operation reply.
cmd_code
Command code
cmdsrc
Command source:

• 0 - SMS,
• 1 - automatic
• 2 - keyboard
• 3 - handset,
• 4 - center,
• 5 - gate
voltage_st
Voltaget status:

• 48 - Serious low voltage
• 49 - Too low voltage
• 50 - Low voltage
• 51-54 - Normal voltage
• 55 - Full