eco_drv
ECO driving
fwere_curr_vers
The current firmware version
fwere_flag
Flag of the firmware change result:
0 – manufacturer's firmware
1 – firmware changed by command from the server
2 – firmware changed by command from the device
gsm_level
CSQ - GSM level
hdop
HDOP:
0 - Perfect
1 - Great
2 - Good
3 - Medium
4 - Below average
5 - Bad
lls_level_#
Fuel level sensor ?#
lls_temp_# (°C)
Fuel temperature sensor ?#
input#
Universal input #
param_209
RTC time, UNIC UTC
pwr_ext (mV)
The voltage of the external power.
pwr_int (mV)
The voltage of the internal battery
reload_flag
Flag of the device reboot reason
scid1
SCID SIM-card ?1
scid2
SCID SIM-card ?2
work_type
Device working mode:
0 – base mode
1 – power saving mode 1
2 – power saving mode 2
3 – power saving mode 3 (deep sleep)
param_106_1_1 (g/1000)
The difference between acceleration value and threshold acceleration value
param_106_1_2 (km/h)
The speed of vehicle, when harsh acceleration event was detected
param_106_2_1 (g/1000)
The difference between braking value and threshold braking value
param_106_2_2 (km/h)
The speed of vehicle, when harsh braking was detected
param_106_3_1 (g/1000)
The difference between lateral acceleration value and threshold lateral acceleration value
param_106_3_2 (km/h)
The speed of vehicle, when lateral acceleration event was detected
param_106_4_1 (g/1000)
The difference between vibration value and threshold vibration value
param_106_4_2 (km/h)
The speed of vehicle, when vibration event was detected
flag
Device status flag (bitwise parameter):
bit0 - (SIM): 0 – work on SIM1, 1 – work on SIM2
bit1 - (GPS): 0 – work on an external GPS antenna, 1 – on internal
bit2 - (GSM): 0 – work on an external GSM antenna, 1 – on internal
bit3 - (Acceleromete
valid
Coordinates validity:
0 - valid
1 - not valid
fwere_base_vers
The base firmware version
relod_flag
Reboot reason flag
hull_state
Hull button status:
0 – open
1 – close
button_state
State of the user compartment button:
0 – open
1 – close
fwere_base_new
Base firmware version
fwere_curr_new
Current firmware version
DI#
DI state witn # number
sim_open
SIM-opening button
hull_open
Hull opening button
acc_temp
Temperature in the device
temp_gsm
GSM module temperature
temp_mk
MK temperature
temp_sim
Temperature of the SIM
param_104_1_1
Security state flag 1
param_104_1_2
Security state flag 2
param_104_1_3
Security state flag 3
param_104_2 (h)
Total running time of the engine
param_104_3 (km)
Total mileage
param_104_4 (l)
Total fuel consumption
param_104_5 (l)
Fuel level in the tank
param_104_6 (rpm)
Engine speed
param_104_7 (°C)
Engine temperature
param_104_8 (km/h)
Vehicle speed
param_104_9 (0.1kg)
Axle 1 load
param_104_10 (0.1kg)
Axle 2 load
param_104_11 (0.1kg)
Axle 3 load
param_104_12 (0.1kg)
Axle 4 load
param_104_13 (0.1kg)
Axle 5 load
param_104_14_1
Accident controller 1
param_104_14_2
Accident controller 2
param_104_14_3
Accident controller 3
param_104_14_4
Accident controller 4
param_104_15 (l)
AdBLUE fluid level
param_104_16_1
State of agricultural machinery flag 1
param_104_16_2
State of agricultural machinery flag 2
param_104_16_3
State of agricultural machinery flag 3
param_104_16_4
State of agricultural machinery flag 4
param_104_16_5
State of agricultural machinery flag 5
param_104_17 (h)
Time of harvesting
param_104_18 (Ha)
Harvested area
param_104_19 (0.01 Ha/h)
Productivity
param_104_20 (t)
Quantity of harvested crop
param_104_21 (0.1%)
Moisture of grain
param_104_22 (rpm)
Separator's RPM
param_104_23 (mm)
Concave clearance on output
param_104_24 (%)
Accelerator pedal position
param_104_25 (%)
Engine load
cmd_answer
Command answer
