FOX3
معرفی دستگاه
- To use a custom message format, you must specify it in the unit properties in the field "Use custom message format".- A custom format must be following: protocols_in_hex,usertext + &(entry),register usertext like text.- Options in the field "usertext + &(entry)" should be separated by a " | " character .- If you want to register all incoming data in the field "usertext + &(entry)" as text, then set 1 else 0.- If you want to register any parameter with a custom name, this name must be written before &(entry). For custom name use the letters of the Latin alphabet, digits, and underscores.- If you want to register the custom text parameter, you should begin the parameter name with a "gg." and specify the value after the " = " character .- Use parameter name "gg_hcc" or "gg_hcvc" before "Course" entry to clarification.- Use parameter name "gg_hcs" or "gg_hcvs" before "Speed.kmh"entry to clarification.- Use parameter name "gg_ai0" or "gg_ai0" before "IO0" entry to clarification.- Use parameter name "gg_ai1" or "gg_ai1" before "IO1" entry to clarification.- Use parameter name "gg_ai2" or "gg_ai2" before "IO2" entry to clarification.- Use parameter name "gg_havax" or "gg_hbvax" before "Attitude" entry to clarification.- Use parameter name "gg_havay" or "gg_hbvay" before "Attitude" entry to clarification.- Use parameter name "gg_fd1cs" or "gg_fd1ws" before "FMS.TC_DRV1_STATE" entry to clarification.- Use parameter name "gg_fd2cs" or "gg_fd2ws" before "FMS.TC_DRV2_STATE" entry to clarification.
0=Low
1=High
0: No password secured
1: Password secured (Changes on the device can be made only with
password)
0 - Normal
1 - 15 min bef. 41?2 h
2 - 41?2 h reached
3 - 15 min bef. 9 h
4 - 9 h reached
5 - 15 min bef, 16 h
6 - 16 h reached
9 - Other
14 - ERROR
15 - not available
0 - Normal
1 - 15 min bef. 41?2 h
2 - 41?2 h reached
3 - 15 min bef. 9 h
4 - 9 h reached
5 - 15 min bef, 16 h
6 - 16 h reached
9 - Other
14 - ERROR
15 - Not available
0 – Not present
1 – Present
err – Device error
n/a – Value not available
0 - Rest
1 - Available
2 - Work
3 - Drive
6 - ERROR
7 - n/a
0 – Not present
1 – Present
err – device error
n/a – value not available
0 - Rest
1 - Available
2 - Work
3 - Drive
6 - ERROR
7 - n/a
M: Manual, operate in 3-D mode.
A: Automatically choose 2-D or 3-D mode.
1: Fix not available
2: 2-D fix
3: 3-D fix
N=No Fix,
A=Autonomous Fix,
D=Differential Fix,
E=Estimated/Dead Reckoning Fix
0: unregistered,
1:registered,
2: Not registered, but searching,
3: Registration denied,
4: Unknown
5: roaming
0: ready;
1: unavailable;
2: unknown;
3: ringing;
4: call in progress.
0 - close
1 - open
