Voyager 5N

lbs

LBS

tcp

Communication via TCP

can_door_fl

A door front the left, 0- is closed, 1- is open

can_door_fr

A door front right, 0- is closed, 1- is open

can_door_br

A door the back right, 0- is closed, 1- is open

can_door_bl

A door the back the left, 0- is closed, 1- is open

can_hood

Hood, 0- is closed, 1- is open

can_trunk

Trunk, 0- is closed, 1- is open

can_guard

Car under guard, 0- shot , 1- taken

can_alarm

Standard security system, 0-norm, 1-alarm

can_at_d

Automatic in D, movement, 0-off., 1-on

can_at_r

Automatic in R, movement, 0-off., 1-on

can_at_n

Automatic in N, movement, 0-off., 1-on

can_at_p

Automatic in P, movement, 0-off., 1-on

can_brake

Brake pedal, 0-released, 1-pressed

can_brake_p

Parking brake, 0-off, 1-on

can_car_move

Movement of the car, 0-no, 1-yes

can_mode_w

Work mode, 0-no, 1-yes

can_ign_key

Ignition key, 0-no, 1-yes

can_accessory

Accessories, 0-off, 1-on

can_ign

Ignition, 0-off, 1-on

can_eng_st

Engine started, 0-no, 1-yes

can_lights_m

Parking lights, 0-off, 1-on

can_deeped

Dipped beam, 0-off, 1-on

can_beam

High Beam, 0-off, 1-on

can_seat_belt

Seat belt, 0-unfastened, 1-fastened

can_wiper

Front wiper, 0-Off, 1-On

can_turn_l

Turn indicator left, 0-Off, 1-On

can_turn_r

Right turn indicator, 0-Off, 1-On

can_lock

Central locking, 0-Open, 1-Closed

gsm_jam

GSM signal jamming (0-No, 1-Yes)

sms_err

Error sending SMS (0-No, 1-Yes)

gps_fix

Coordinates found (0-No, 1-Yes)

temp1_hi

External sensor temperature is above threshold (0-No, 1-Yes)

temp1_lo

External sensor temperature - below threshold (0-No, 1-Yes)

sm

Motion sensor (0-no movement, 1 - movement)

sa

Acceleration sensor (0-norm, 1-alarm)

si

Incline sensor (0-norm, 1-alarm)

ss

Impact sensor (0-norm, 1-alarm)

sc

Accident sensor - exceeding the set threshold on any one of the axes (1-alarm)

st

Tipping sensor - exceeding an angle of 45 degrees (1-alarm)

sr

?oup sensor - the excess angle of 90 degrees. (1-alarm)

test

Test mode / Setup mode 0-no, 1-yes

alarm

0-norm alarm, 1-alarm (panic button)

traffic

Traffic, 0-parking, 1-traffic

int_bat

The discharge of the internal power source is 0-normal, 1-discharged

config

Connecting the configuration cable 0-no, 1-yes

prog

Remote programming or configuration 0-no, 1-yes

tamper

0-device is closed, 1 - device is open

3dfix

0 - 2D fix, 1 - 3D fix

call1

"Call-1" button (0- not pressed, 1-pressed)

call2

"Call-2" button (0- not pressed, 1-pressed)

call3

"Call-3" button (0- not pressed, 1-pressed)

no_link_ext

No connection with the expander, 0-there is a connection, 1-no connection

eng

Engine started (0 - stopped, 1 started)

ext_bat

Discharge of the external power source (0 - normal, 1 - discharged)

pwr

External power supply (0 - No power, 1 - Power sup

ign

Ignition, physical connection (0 - off, 1 - on)

charge

Charge of the built-in backup power source (0 - off, 1 - on)

reset

Device reboot (0-Normal, 1-Reboot)

nav_pwr

Turn on navigation receiver (0-off, 1-on)

link_pwr

Turn on communication module (0-off, 1-on)

reed_sw

Reed switch on break (0-normal, 1-alarm)

ext_magn

Reed switch protection from the external field (0-norm, 1-alarm)

reed_sw_ext

External reed switch (external input) (0-normal, 1-alarm)

master_code

Invalid master code entry, access denied (0-No, 1-Yes)

new_bs

Cellular operator base station change (0-No, 1-Yes)

hold_conn

Hold connection to server (0 - Off, 1 - On)

track_mode

Tracking Mode (0-Off, 1-On)

key_tm

1-TM key attached, 0-key not attached

din#

Discrete input #(some number) (0 - no signal, 1 - there is a signal)

dout#

Discrete output #(some number) (0 - open, 1 - closed)

type

Record type. 1 - in time, 2 - in displacement, 3 - in event

flag

The record transfer flag. 0xFF-not transmitted, 0x33-transmitted

indx

Unique 32-bit history entry counter, +1 for each new

hdop

Decrease of accuracy in the horizontal plane hh.h (0.00-25.5)

vdop

Reduced accuracy in the vertical plane vv.v (0.00-25.5)

pwr_ext

U externally

pwr_int

U internal

fuel_s#

Fuel #(sensor number)

fuel_s#_t

Temperature #(sensor number)

temp_cpu

Temperature CPU

temp_1w

1-Wire Temperature

fuel_r1

Fuel rate 1

fuel_r2

Fuel rate 2

fuel_f1

Fuel 1 (Hz)

fuel_f2

Fuel 2 (Hz)

fuel_a1

Fuel 1 (ADC)

fuel_a2

Fuel 2 (ADC)

gsm_lvl

GSM signal level indication, -128 - no network registration

wifi_lvl

WIFI signal level indication, -128 - no registration in the network

acc_x

X-axis acceleration

acc_y

Y-axis acceleration

acc_z

Z-axis acceleration

acc_v

Maximum acceleration module

acc_vs

The mean value of the acceleration modulus

tangage

Pitch

roll

Roll

tm_key

TM key

mac

MAC

mcc

Country code

mnc

Cell phone operator code

cell_id

Cell

lac

Area

rx_lvl

Signal strength

nav_mileage

Mileage of the device, according to the navigation data from the history of the device, in motion, in meters

nav_h

Hours, calculated in the device, in seconds

fuel_s5

Fuel gauge reading (RS232)

fuel_s5_t

-127 .. + 127 temperature from the fuel sensor (-128 - no indication) (RS232)

pdop

Geometric accuracy reduction vv.v (0.00-25.5)

lat_lbs

LBS or Wi-Fi Latitude

lon_lbs

Longitude LBS or Wi-Fi

rec_ok_count

The number of all confirmed entries sent to the server

rec_f_count

Number of records that could not be sent

conn_count

Number of server connections

sms_count

Counter sent SMS per day

doors_en

Bit 0..7 - the door 1..8. bit = 0 - no door, bit = 1 - there is a door

doors_ts

Bit 0..7 - the door 1..8. bit = 0 - closed, bit = 1 - open (door switch)

doors#_cntr_in

Door #. entrance counter, FFFF - no data

doors#_cntr_out

Door # exit counter, FFFF - no data

can_fuel_l

Fuel level, l; 32768 - not available

can_fuel_p

Fuel level, %; 128 - - no data

can_fuel

Total fuel consumption

temp_af

Coolant temperature, hail; 32768 - not available

rpm

Turnovers engine

ifc

Instant consumption

can_hours

Engine hours

can_mileage

Total mileage

can_up_service

Mileage to technical inspection