امروز : جمعه , ۱۰ فروردين ۱۴۰۳

Teltonika AT1000

معرفی دستگاه

You can also download an example of Teltonika AT1000 configuration file to connect it to Wialon GPS tracking software. You can also download an example of object configuration file for Teltonika AT1000 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with sensors. For communication via SMS, enter "login password" defined for the device and divided by the space in the "Device access password" field of the GPS unit in Wialon GPS tracking software. To support «24 SMS in 1» mode, the interval between the points should be 900 seconds as it is on the server, i.e. the value should be 900000 ms in the device configuration. I/O elements are additional source of information and are registered together with GPS data.

این محصول توسط Teltonika تولید شده است و در گروه AVL Hardware قرارداد.

bbox_auto
Blackbox
odometer
Built-in odometer
adc
ADC sensors
can
CAN-bus support
ibutton
Driver identification
inputs
Digital sensors
sms_in
SMS sending of data
sms_req
Remote management via SMS
tcp
Communication via TCP
udp
Communication via UDP
battery_charge
Battery charge
canN
CAN specific data (I/O property 145-154)
counter1
Fuel Counter (I/O property 76)
driver_code
Shows the moment of binding/unbinding a driver:
1 - binding
0 - unbinding
driver_status
Garmin driver status
gsm
GSM signal strength level 0 (lowest) – 5 (highest) (I/O property 21)
hdop
Horizontal Dilution of Precision (I/O property 20 or 182)
last_driver_status
Last Garmin driver status
paramN
Value of special I/O property, where N - ID of property
pdop
Position Dilution of Precision (I/O property 22)
priority
Message Priority:
0 - low
1 - high
2 - panic
3 - security
pwr_ext (V)
Power supply voltage (I/O property 66)
pwr_int (V)
Battery voltage (I/O property 67)
vdop
Vertical Dilution of Precision (I/O property 21)