bbox_auto
Blackbox
gprs_req
Remote management via GPRS
lbs
LBS
sms_req
Remote management via SMS
tcp
Communication via TCP
sw_ver
Software Version
mcc
Mobile Country Code
mnc
Mobile Network Code
lac
Location Area Code
cell_id
Cell ID
rx_level
Signal Strength
valid
- 0 - GPS is not fixed
- 1 - GPS is fixed
pwr_ext (V)
Voltage value of main power
pwr_int (V)
Voltage value of backup battery
msg_type
h_meter
Driving hour-meter
emg_id
Emergency type
alert_id
Alert type
trvl_dist (m)
Traveled distance during this travel
trvl_time (sec)
Time of this travel
trvl_st_lat
Latitude of start position of this travel
trvl_st_lon
Longitude of start position of this travel
trvl_fi_lat
Latitude of end position of this travel
trvl_fi_lon
Longitude of end position of this travel
spd_avg
Average speed in this travel
spd_max
Maximum speed in this travel
time_ovr_spd
Accumulated time that the car exceeded over - speed in this travel
prkng_time
Parking time
t_spd_XX (sec)
Speed between XX and XX+10 limit
pid_XX
XX - pid number
t_rpm_XXXXX (sec)
Time during RPM, where XXXXX - one of 0, 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000
mode
- 1 - Idle mode (Parking)
- 2 - Active mode (Driving)
msg_num
Message number. After “9999” is reported, message number returns to ‘0000”.
preset_resp
Response values for the Preset and PresetA command
